Door Locks cabinet handle for Server racks

● Accessories

     Fans
     Monitoring
     Temperature Climate

● Electrical Outlets Power
● Lights
  ● Lock types
     Keyless
     Combo
● Management
     Casters
     Rail Kits

● Wall Mount Hardware

● Distribution Rack

● 4 Post Rack Basic
Four Point mounting

● 4 Post Rack Frames
Buildable Frames

● Nema 12 Enclosure

● Air Conditioned Nema 12
● Nema 12 Standard

● Server Rack

● 25U Server Rack
● 42U Server Rack
● 45U Server Rack
● Ultra Dual compartment

● Shelves

● Shelf 19"
● Shelves 23" rails
● Keyboard Shelf
● Frame Mount Shelve

● Swing Out Racks

   ● 12 inch Swing rack
   ● 48 high Swing Wall rack
   ● 84 high Swing Wall rack

● Wall Mounted computer cabinet

   ● Wall Cabinets
   ● Wall Accessories
   ● Wall Mount Brackets

Door Lock Cabinet Handle for server racks cabinet doors and cabinet programmable electronic locks for server doors.

These door locks cabinet handle are special ordered for the cabinet so email or call for your choices. These will also fit other make cabinets but you will have to make sure you cut out the door lock opening to fit if necessary. There are all types of cabinet door lock handles. They fit out cabinets and some other manufactures cabinets too.

Of particular interest is the combination locks with key overrides and the the electronic lock with manual punch key entry.

PepX8815-0103
With combination lock.

The combination lock shown here is not exact. Actually the combo lock is on the side of the handle as opposed to the front.

PepX8815-0102
Handle with Pad Lock

PepX8815-0101
Removable lock insert.

PepX8815-0100
Latch with lock.

PXLock-107
Pad lock mechanism

PXLOCK-1399-15
Combo lock with Key Override

Electronic locks with manual punch pad entry

PepX8810-0100
Electronic lock: makes use of an internal generator to provide all necessary power. No wiring required, no batteries, no power outage malfunction and no maintenance. Single combination access, dual-level security with four-digit PIN and personal encoded key, hacker lock-out, time delay entry.

Electronic Locking System... HID Lock with Network control.

	HID DIRECT SWING HANDLE
The HID-Direct Swing handle lock offers linking of several cabinets or doors based on and Ethernet TCP/IP network Administration, actual status of all handles, authorization of the transponders as well as an extensive database of all stored events can be achieved in the network by means of E-Line application software. The handle is configured with its own IP address and its directly connected to a PC via the Ethernet LAN. Utilizing the DIRAK E-Line software, it is no problem for the HID-Direct model to establish combined network operations with other E-LINE series swing handles, HID-485 and Wireless - Active. Should he connection to the DIRAK E-LINE software be interrupted, up to 500 event will be stored by the reader. They will be transferred to the database as soon as the application software is available again. It is possible to operate the HID-Direct handle as a stand alone solution. In that case, administration is not carried out vie E-LINE software but at the handle by means of a master card.
E-Line Software and reader unit. Multi-colored status - LED display. Power-Supply 12V +-10%(DC) via low voltage jack. Temperature sensor integrated.

Home | Fax Orders

04/29/2012