Lan server rack

This  is not just any thrown together way to mount your lan server rack network items. This SWING OUT rack can mount close to a wall and take up very little space compared to other server rack stands that do  not have the tremendous swing feature.

If space is crucial then this is the choice.
 

PEPXSW-8419
Your planning an equipment room and should be thinking about conserving space, well this is the rack for you. 84 Inches high and mounts on the wall. Ships fast.

84"H x 19"W.   
Shown here loaded with some panels and rack mounted equipment installed. Depth is the dimension from wall..


  

If you are  planning a equipment room or a space that will house your server rack equipment then this lan server distribution rack can give you more space  left over then before. The top has an optional basket that will allow storage of items. Another great feature is the way you can run cable for the cable management allows for cable routing without interference of the swing rack. A friction lock prevents rack movement while servicing. The rack can be positioned as close as 7" from a wall. It can also be assembled as left or right opening 90 °. Provides ease access to the rear of the rear of rack mounted equipment in a free standing environment. A space saving item.

• New Free Standing Swing Rack. Innovative design provides easy access to the rear of rack mounted equipment in a free standing environment. 
  Primarily used in areas where space is limited and rear access is essential.
• Manufactured from 12 ga. cold rolled steel. 34U of 19" equipment mounting tapped 10-32. 
• Heavy duty casters allow for mounting 500  lbs. of equipment.
• Cable Management:  14-3.5" x 3.75" cable management access openings on the front of the rack provide for 183.75 square inches of cable openings. 
• Equipment mounting is EIA-310-D compliant with a 4" deep upright channel. Each rack includes assembly instructions from the factory and 80 mounting screws.
• Left or Right: Can be built as either a left for right hinged.
  Locking frame can be released with a lift and turn latch mechanism.
  Rack can be positioned as close as 7" from wall. 
• Equipment up to 18.5" deep can be pivoted 90 degrees to the right or left.
• Cable Routing: Either top or bottom cable routing.
• Friction lock is included to help prevent rack movement while servicing.
• Can Be Side Stacked - racks can be bolted side to side.
• Power Strip Mounting Kit - PEPXSW-0100
• Wire Basket- Top Mount basket and brackets PEPXSW-0200
• Shelves - Can take Optional shelves - PEP9011-1912 12" Depth Vented Cantilevered Shelf or
  PEP9011-1918 18" Depth Vented Cantilevered Shelf (Sold separately).

The new free standing swing rack is an innovative swing-out rack. It provides easy access to the rear of the rack mounted equipment in a free standing environment. Primarily used in areas where space is  limited and rear access is essential. Manufactured from 12 gauge cold rolled steel. 43 U of 19" equipment mounting tapped 10-32. Heavy duty casters allows for mounting 500 lbs of equipment. 14-3.5" x 3.75" cable management access openings on the front of the rack provide for 183.75 square inches of cable openings. Equipment mounting is EIA-310-D compliant with a 4" deep upright channel. Each rack includes assembly instructions and 80 mounting screws.

• Can be built as either a left or right hinge and opens 90 degrees. Locking frame can be released with a lift and turn latch mechanism.
• Rack can be positioned as close as 7" from wall. Equipment up to 18.5" deep can be pivoted 90 degrees to the right of left.
• Rack can be bolted side to side and Friction lock is included to prevent movement while servicing.
• Cable management allow for cable routing without interference of the swing rack, can be from either top or bottom.