66 Block | Wiring Cross Connect| 66 punch down
Shopping Cart
66 Block book mark

25 Pair Connector
Jacks PepX Connector
Beanie Connector
Voice Phone
25 Pair
Panel Amphenol 25 Pair
66 Block Veteran Owned Flag.

66 Block Wiring Cross Connect, 66 Block Punch Down.


Play 66 block video 66 block wiring cross connect voice or data to a proper punch down. Telco or voice cross connecting of pairs can be done on 66 blocks.  1 pair or more can be connected to the block. Cross over clips can be used to connect the pair coming in to the block to the pair leading out of the block.

Mount these on the wall of your equipment room or phone closet and punch down all the phone connections you need, and expand from block to block with wiring clips. Most units come with their own wall mount bracket. Usually phone lines will be punched on the left and cross connected to the right of the block. Bridging clips are used to complete the connections. 66 block price


40066-M25
66 Block M-Block 25 Pair Punch Down for voice 40066-M25 telco - Leviton PXID-281
 66 Block M-Block 25 Pair Punch Down for voice 40066-M25 telco - Leviton PXID-281
M-Block 25 66 Block Pair
Contains 50 rows, each with a single clip having four slots as pictured below. Incoming cable pairs are connected by terminating the tip conductor on the leftmost slot of one row, and the ring conductor on the leftmost slot of the next lower row. The three remaining slots in each clip are available for cross connects.
  Get Price

40066-M50
50 Pair Leviton Split M-Block Punch Down Block - Leviton PXID-282
 50 Pair Leviton Split M-Block  Punch Down Block - Leviton PXID-282
Split M BLOCK 50 Pair
The split M Block like the 25 pair M Block, contains 50 rows of clips, but instead of one 4 slot clip, each row contains two separate 2-slot clips. By terminating 25 incoming pairs on the slots of the left hand clips and an additional 25 pairs on the slots of the right hand clips, 50 cross-connects can be made. Alternatively, bridging clips may be used to connect the two adjacent sets of clips together.
  Get Price

40066-0MW
50 pair - 66 M Block with 25 Pair Prewired Amphenol style connector - Leviton PXID-283
 50 pair - 66 M Block  with 25  Pair Prewired Amphenol style connector - Leviton PXID-283
50 PAIR M-BLOCK WITH 25 PAIR FEMALE CONNECTOR
Pewired, pretested 25-pair female connector on left side fanning strip to speed connection of incoming pairs.
  Get Price

40066-MW2
50 Pair Prewired 66 w/25 Pair Fem and 25 Pair Male - Leviton PXID-284
 50 Pair Prewired 66 w/25 Pair Fem and 25 Pair Male - Leviton PXID-284
50 PAIR PREWIRED
Pretested pre-wired 25 pair female connector on left and male connector on right for fastest installation. Simply plug in connectors and insert bridging clips to complete the connections.
  Get Price

40067-0BC
66 Punch Block Bridging Clips Bag of 50 use cross connection clip- Leviton PXID-285
 66 Punch Block Bridging Clips Bag of 50 use cross connection clip- Leviton PXID-285
BRIDGING CLIPS
Clips press onto the two center slots in any row of a Split M block. If Outside cable pairs are terminated on the left hand clips, then connections may be made or eliminated easily just by inserting or removing the bridging clip. Also, can be used on other products that use 66-clips. Made of tin-plated phosphor bronze alloy, these clips can be easily removed and reused for rewiring.
  Get Price

40072-0T4
4 Position Modular Adapter to 6 position for 66 Blocks PXID-287
 4 Position Modular Adapter to 6 position for 66 Blocks PXID-287
Four Position Modular Adapter for 66 Blocks.
Converts 4 contacts into a 6 position, 4 conductor modular jack.
  Get Price

40066-0MR
50 Pair 66 Demarc block w/Prewired 25 Pair Female connector - Leviton PXID-290
 50 Pair 66 Demarc block w/Prewired 25 Pair Female connector - Leviton PXID-290
M BLOCK: 50- Pair
Designed for use at the demarcation point, this 50-pair M Block includes mounting bracket and snap-on orange cover with designation strip. Prewired, pretested 25-pair female connector mounted on right side speeds connection of customer premise equipment to the network interface.
  Get Price

PD66-573-25
66 Punch Block 25 Pair for Data and Phone - SNT PepX PXID-573
 66 Punch Block 25 Pair for Data and Phone - SNT PepX PXID-573
66 BLOCK PUNCH DOWN 25 PAIR
25 Pair punch down block for Telephone or Data. Mounts to wall or on to 89D Style bracket or No bracket direct mount. Contains 50 rows, each with a single clip having four slots as pictured below. Incoming cable pairs are connected by terminating the tip conductor on the leftmost slot of one row, and the ring conductor on the leftmost slot of the next lower row. The three remaining slots in each clip are available for cross connects.
  Get Price

PD66-587
66 Punch Block Bridging Clips for cross connection of telco blocks PepX PXID-587
 66 Punch Block Bridging Clips for cross connection of telco blocks PepX PXID-587
BRIDGING CLIPS 100 Per Bag
Clips press onto the two center slots in any row of a Split block. If Outside cable pairs are terminated on the left hand clips, then connections may be made or eliminated easily just by inserting or removing the bridging clip. Also, can be used on other products that use 66-clips. These clips can be easily removed and reused for rewiring.
  Get Price

PD66-590
66 Punch Block 25 Pair Mounting Bracket for Wall - PepX PXID-590
 66 Punch Block 25 Pair Mounting Bracket for Wall - PepX PXID-590
WALL MOUNT BRACKET for 25 Pair Punch Down Blocks
Mount 25 Pair punch down block to this 89D style bracket.
  Get Price

40089-00D
Mounting Bracket 89D for patch panels 12 port and other panels - Leviton PXID-613
 Mounting Bracket 89D for patch panels 12 port and other panels -  Leviton PXID-613

Mounting Bracket 89D type.
Use with 12 port field configurable patch panels and other 89D style panels.
  Get Price

40089-00B
Bracket M Block Stand Off used on M Block 66 block mounting - Leviton PXID-776
 Bracket M Block Stand Off used on M Block 66 block mounting  - Leviton PXID-776
M Block Stand off Bracket
For Leviton M blocks. DISCONTINUED - See 40089-00D instead.
  Get Price

40050-MHG
Hinged cover for 66 M Blocks used on 66 Blocks to protect wires - Leviton PXID-777
 Hinged cover for 66  M Blocks used on 66 Blocks to protect wires - Leviton PXID-777
Hinged Cover for M 66 Blocks
For Leviton M blocks.
  Get Price

40050-MCV
Snap on cover for 66 M Blocks to close it up for cross connect - Leviton PXID-818
 Snap on cover for 66 M Blocks to close it up for cross connect  - Leviton PXID-818
Snap On Cover for M 66 Blocks
For Leviton M blocks.
  Get Price

40072-0T2
Leviton modular plug adapter 2-66 block clips to 6 Pos 2 Contacts PXID-903
 66 Block Adapter Cross Connect
Modular plug for 66 blocks
To convert to a 6 Position 2 Contact plug. This is great for adapting for purpose of tesing or cross connection.
  Get Price

40072-0T6
Leviton modular plug adapter 2-66 clips to 6 Pos 6 Contacts PXID-905
 40072-T6  6 Position modular adapter
Modular plug for 66 blocks
To convert to a 6 Position 6 Contact plug. This will give you a 6 position RJ plug that you can plug into or use for an test. Clips onto the 66 block pins.
  Get Price

40072-0T8
Leviton modular plug adapter 8-66clip to 8 Pos 8 Contacts 568B 40072-T8 PXID-906
 40072-T8 Adapter
Modular plug for 66 blocks
To convert to a 8 position plug from a 66 block. Just push onto the 66 block and will give you an 8 Position 8 Contact 568B plug that you can plug into.
  Get Price


Total Records: 17   22