|
Used for fastening cable to
structures or to other cables. When using a cable tie on a cable be
certain not to crimp the cable itself to tightly or you may damage it
and performance may be hindered.
Patch cords
are used for cross connect of computer cable to things like hubs, routers
and switches. Usually from patch panel
to the hub or switch.
Fasteners such as clamps and beanie
connectors are also essential to cable installations. Check them out to see
what you may not have thought of already. Check
out the Premier Flex cable OFC Oxygen free burial or
indoor use.
|
|
All connectors, patch panels
and cable are for low voltage computer data applications.
Not meant for use in high voltage circuits or household or building circuits. Should only
be connected or assembled when no voltage at all is
applied to the circuit. Customer should know the difference
between and be knowledgeable of cables and their use prior to ordering or
purchasing, including but not limited to things such as plenum or
non-plenum cable, patch cable, indoor or outdoor cable or the type of
cable or connectivity items or other items that customer or purchaser intends
to purchase or order. Installation and
purchase is at the customers own risk. Customer should verify at time of
receiving, all labeling, markings on package, reels, boxes and on physical cable that the cable or
any item that has been ordered is in fact the cable or item that they received prior to
use. Once used there
is no return. Customer should also understand and be knowledgeable of EIA/TIA 568-A and 568-B cable installation techniques and other
requirements. It is recommended that customer use qualified professional cable installers or
seek professional installation advice.
Customer assumes all responsibility and
liability for
proper installation, use, purchase, safety and local and national code
requirements and any damage caused by any installation or materials, proper
inspection and installation is the customers sole responsibility. Outside cable
installation should have proper provisions for entrance and exit of
buildings, exposure to lightning and electrical shock protection and other
requirements
Cable length tolerance for cable 0 to 5% when
ordered from factory. No returns -refunds on cable, special orders, cut
lengths, partial reels, or unused portions of reels. Colors may be
substituted if not available. May come on reels or
reel in a box or boxed. .
|