|
| EZ-PXONESHOT-A | | Cat 5e Cat6 One Shot 4pair termination Tool for PepX Keystone Jacks - PepX PXID-64 | |
 |
Jack EZ-PXONESHOT Termination tool
Terminate PepX Cat5e and Cat6 and Leviton jacks all on one shot. Place the cable into the jack on to the tool and terminate all 4 pairs in at once. Use on Keystone PepX Jacks and Leviton 90 Degree jacks. |
|
|
| | SNT243Y-W | | RCA Insert Gold Pop In Pass through w/Yellow Nose ID insert - SCPepX PXID-309 | |
 |
Insert RCA Pass Through Connector YELLOW ID Nose Stripe
For passing through a face plate or surface mount box.
Gold plated in three different body colors, White, Ivory, Almond. Nose of plug is color ID color coded in YELLOW. (Other ID code colors of Blue, Black, Red and White are available). Just pop these into a face plate or a surface mount box Pop-in opening. |
|
|
| | PX-C5E-W | | Cat5e Jack 8 Position 8 Contact Gigabit RJ-45 568A/B SNTPepX PXID-226 | |
 |
Cat5e Jack
Exceeding current TIA/EIA Cat5e specification to support 1000 Base-T & gigabit ethernet system applications. Exceeding current TIA/EIA-568-B-2-1. Available in both T568A & T568B universal wiring. Get Pepermint® Category 5e quality with the right price. |
|
|
| | PX-5E303104A-W | | Cat5e in Line Coupler Jack Face Plate mounted RJ45 to RJ45 SNTPep-X PXID-303 | |
 |
IN LINE RJ45 to RJ45 Coupler.
Can be snappped into a Pepermint-X wall plate and connect two Male RJ45 plugs together. This is a real saver. Don't know what to do need to go a few feet more and have to continue that connection? This is your anwer. This will bridge that divide by allowing you to plug in the back and the front to continue the cable run.
Colors White or Black... |
|
|
| | PX-C5ES-1286-JK | Shielded | | Cat5e SHIELDED RJ45 Jack used with Shielded cable installs- Pep-X PXID-1286 | |
 |
CAT5e SHIELDED JACK RJ45
RJ45 shielding wraps around the jack. |
|
|
| | PX-CAT6JK-W | | Cat6 Jack 8 Position Gigabit RJ-45 Connector 568A/B Category 6 SNTPepX PXID-228 | |
 |
Cat6 Jack
PX6 PepX Exceeding current TIA/EIA Cat6 specification to support 1000 Base-T & gigabit ethernet system applications. Exceeding current TIA/EIA-568-B-2-1. Available in both T568A & T568B universal wiring. Get Pepermint ® quality with the right price.
|
|
|
| | PXC6-1495-W | | Cat6 in Line Coupler Jack Face Plate mounted RJ45 to RJ45 SNTPep-X PXID-303 | |
|
CAT6 IN LINE RJ45 to RJ45 Coupler.
Can be snappped into a Pepermint-X wall plate and connect two Male RJ45 plugs together. This is a real saver. Don't know what to do need to go a few feet more and have to continue that connection? This is your anwer. This will bridge that divide by allowing you to plug in the back and the front to continue the cable run.
Colors White or Black... |
|
|
| | PX-CAT6AJK | | Cat6A Jack 8 Position Gigabit RJ-45 568A/B best prices and quality Pep-X PXID-1284 | |
 |
Cat6A Jack
Meets or exceeds current TIA/EIA Cat6 specification to support 1000 Base-T & gigabit ethernet system applications. Exceeding current TIA/EIA-568-B-2-1. Available in both T568A & T568B universal wiring. Get Pepermint ® quality with the right price. Use a Pop In Field Configurable patch panel and be able to budget your project and also put in other jacks without buying additional styled cross connect panels. Just pop in. |
|
|
| | PX-C5E1285-JK | Shielded | | Cat5e in Line Coupler Jack SHIELDED mount pop in RJ45 to RJ45 Pep-X PXID-1285 | |
 |
IN LINE RJ45 to RJ45 Shielded Coupler.
Can connect two Male RJ45 plugs together. This is a real saver. Don't know what to do need to go a few feet more and have to continue that connection? This is your anwer. This will bridge that divide by allowing you to plug in the back and the front to continue the cable run. |
|
|
| | PX-C3103-W | | Phone Jack USOC Telephone Voice Jack 6 Position 6 Contact RJ12 Pep-X PXID-227 | |
 |
VOICE USOC 6 Position Jack
RJ-12 used for voice connections. Snaps right into face plates. Comes in several colors. No need to spend a lot more with Pepermint quality. USOC Voice Connector, 6 pos. 6 Contacts 110 IDC 90 Degree angle USOC UL approved Unshielded RJ12 Jack. |
|
|
| | SNT241B-W | | Speaker Binding Post Connector Banana Plug Pop-In Black ID Audio - Pep-X PXID-312 | |
 |
Speaker Binding Post Connector Insert female Banana plug for passing through a face plate or surface mount box. Screw on rear push in or screw front.
Stripe ID color is BLACK (Other strip color available is RED).
Just pop these into a face plate or a surface mount box Pop-in opening.
 |
|
|
| | SNT241R-W | | Speaker Binding Post Connector Banana Plug Pop-In Red ID Stripe - Pep-X PXID-313 | |
 |
Speaker Binding Post Connector for passing through a face plate or surface mount box. Screw on rear screw on or snap in front.
Stripe ID color is RED (Other ID strip color available is Black).
Just pop these into a face plate or a surface mount box Pop-in opening..
|
|
|
| | SNT-579-TL | | Tool Punch Down 110 budget tool priced right small jobs - PepX PXID-579 | |
 |
Punch Down Tool - Cable Stripper Cat3-Cat6
This simple budget punch down tool and cable stripper is ideal for installers where only a few punch downs are going to be made and the more expensive pro tools are not needed.
Plastic - use it until you wear it out or use it once and throw it away. Doing a small job can be made less expensive if your not a professional network installer, and even if you are these are simple and budget priced. Don't worry if you loose it you can always purchase another one. What makes it nice is it's punching and stripping capabilities. |
|
|
| | SNT-808 | | Cable stripper Tool Cat5e - Cat5 - Cat6 just twist and spin stripping SNTPepX PXID-706 | |
 |
Tool Cable Stripper Cat5e
SNT Trying to figure out how do I cut off the outer jacket on the Cat5 or 5e cable? This is your answer. Another handy little tool that cuts of the outer jackets easy. Does not nick inside cable. |
|
|
| | SNT-819 | | Tool Impact Mult pair 4-5 pairs at a time Cat5e to 110 Blocks - Pep-X PXID-1159 | |
 |
Tool Multi Pair Punch Down Punch 4 to 5 pairs at a time. 24 Awg. Suitable for both cable side and connect side termination blocks. Blades are chanagable and reversible. Use on 4 pair block as long as end is not blocked. |
|
|
| | SNT1690-001 | | Punch Down impact Tool with blade for 110 and other terminations - Pep-X PXID-701 | |
 |
Punch down tool with blade.
Impact termination tool. Reversable blade. If you are an installer or putting in cable and need to punch it down than you can't do without this tool. Fits most other brand blades too. This one comes with a blade. Most other tools the blade is extra. That's what makes this a super deal. |
|
|
|
Total Records: 16 22 |
