Structured Media Module Cat5e + Cat6 This module contains 12 Cat5e connectors and also 12 Cat6 connectors. No need to compromise on your network, this has both. Cat5e and Cat 6.
APPLICATION Leviton's six Twist & Mount Patch Panels are designed for use in any of Leviton's existing Structured Media® Centers to support a variety of telephone and data distribution needs. These panels hold patching modules, which allow 12 or 24 ports of patching capability to CAT 5e or CAT 6 cabling. The CAT 5e ports meet the requirements of high-speed data applications, and the CAT 6 ports are designed for use in high megabit applications such as Gigabit Ethernet.
SPECIFICATION The Twist & Mount Patch Panels shall meet all applicable standards: cULus Listed; TIA/EIA-568-A/B, and FCC Part 68 compliant. The units shall include a black plastic mounting bracket and patching modules, which allow 12 or 24 ports of patching capability to CAT 5e or CAT 6 cabling. The panels shall have universal T568A and T568B wiring cards for terminations. The bracket shall be made of fire-retardant ABS plastic, with a UL flammability rating of 94V-0 and shall have four category rating labels. The panel shall be offered in six configurations according to 12-port or 24-port applications. The 12-port configurations shall consist of 12 ports of CAT 5e, 12 ports of CAT 6, or a combination of 6 ports each of CAT 5e and CAT 6. The 24-port configurations shall consist of 24 ports of CAT 5e, 24 ports of CAT 6, or a combination of 12 ports each of CAT 5e and CAT 6. The panels shall fit into any Leviton Structured Media Center enclosure. The manufacturer shall provide a two-year limited product warranty.
Commercial grade telephone and data patching
Component-rated CAT 5e and CAT 6 ports
Jacks include Leviton’s patented Retention Force Technology®
Meets TIA-570-B bend radius requirements
Universal T568A and T568B wiring labels
IDC termination with Universal 568A and 568B wiring cards
Includes port designation strips
Fits easily into any Leviton Structured Media Center enclosure
Black plastic mounting bracket
Includes plastic punch-down tool
Meets all applicable standards and listings
CAT 6 components meet or exceed the Category 6/Class E requirements for channel/component level performance per TIA/EIA-568-A/B, 2-1 and ISO/IEC 11801-B.
CAT 5e components meet or exceed all TIA/EIA-568-A/B for Category 5e requirements
Meets FCC part 68
COUNTRY OF ORIGIN
Made in U.S.A.
Materials: Bracket, ABS plastic, rated per UL 94V-0
Two-year limited product Manufacturres warranty.
Purchaser maintains that they have the knowledge and ability to handle, assemble, install or otherwise use
these products and is familier with any use requirements and may need to consult a professional installer if necessary or refer to building and NEC codes.
Prices are subject to change without notice, you will be notified of any upward increase on any active order for your approval prior to our processing your order.
May require protection devices if exposed outside. Cable length tolerance is 0-5%. All cable products for low voltage use only and should be installed with no voltage applied.