Surface Mount Back Box Single Gang for Wall Plate - SNTPepX PXID-597
Surface Mount Back Box Single Gang for Wall Plate - SNTPepX PXID-597
Home \| Previous \| Specials \|

Surface Mount Back Box Single Gang for Wall Plate - SNTPepX PXID-597

ITEM NO: PX-597BOX-W
Click picture to enlarge photo

See color box if color choices

For Network cable takes face - wall plate not included.
Takes single gang regular or midsized wall plates.

Surface Mount Back Box
Single Gang takes a wall plate (sold separately). 4 1/2" High x 1 7/16" x 2 1/2W Deep with 2 Screws included. Plenty of knock out areas for entrance choices. 4 Mounting holes for screwing to surface. Standard single gang wall plate fit this box.


Qty	Price	Pack
25 +	$1.78	Ea
1 +	$1.99	Ea
Quantity:

NOTE - once this item has been placed in your shopping cart hit Reset before changing color or quantity again.
Plus Auto Pricer: $
Color: WHITE

Other Items might be related, LOWER Priced, replace or used with the above.
PX-BX612-W	SCP201-W	SCP202-W	SCP203-W
6 or 12 Port Surface Mount Box for Pop In Jack connector unloaded - Pep-X PXID-131	Face Plate 1 Port Wall plate Single Gang for Pop In Connectors - Pep-X PXID-298	Wall Plate 2 Port Face Plate Single Gang Keystone - SNTPep-X PXID-299	Wall Plate 3 Port Face Plate Single Gang Keystone - Pep-X PXID-300

SCP204-W	SCP206-W	PX-BX102-W	PX406-900W
Wall Plate 4 Port Face Plate Single Gang Keystone - Pep-X PXID-301	6 Port Face Plate Single Gang wall plate for pop in jack combinations PepX PXID-302	2 Port Surface Mount Box takes Pop In Insert Connector - PepX PXID-315	Cable Mounting Clips fasten and secure cable Cat5e Cat6 Bag of 100 - Pep-X PXID-406

P227-520U10P	SNT242-W	PX-996-B10	PX-3030-W
Surface Mount Voice block 4 Position 4 Contacts 10 Pack- PepX PXID-884	Wall Plate Face Plate Blank Single Gang for Standard wall box - Pep-X PXID-928	Box Eliminator 10 pack- for dry wall face plate installation Single Gang Wall Box Eliminator PepX PXID-996	Face Plate 3 Port MID SIZE Single Gang wall plate - PepX PXID-1114

Surface Mount Back Box Single Gang for Wall Plate - SNTPepX PXID-597 network cable sellntell.com logo

Purchaser maintains that they have the knowledge and ability to handle, assemble, install or otherwise use these products and is familier with any use requirements and may need to consult a professional installer if necessary or refer to building and NEC codes. Prices are subject to change without notice, you will be notified of any upward increase on any active order for your approval prior to our processing your order. May require protection devices if exposed outside. Cable length tolerance is 0-5%. All cable products for low voltage use only and should be installed with no voltage applied.

Surface Mount Back Box Single Gang for Wall Plate - SNTPepX PXID-597

Home | Previous | Specials |

Surface Mount Back Box Single Gang for Wall Plate - SNTPepX PXID-597

Surface Mount Back Box Single Gang takes a wall plate (sold separately). 4 1/2" High x 1 7/16" x 2 1/2W Deep with 2 Screws included. Plenty of knock out areas for entrance choices. 4 Mounting holes for screwing to surface. Standard single gang wall plate fit this box.

Surface Mount Back Box
Single Gang takes a wall plate (sold separately). 4 1/2" High x 1 7/16" x 2 1/2W Deep with 2 Screws included. Plenty of knock out areas for entrance choices. 4 Mounting holes for screwing to surface. Standard single gang wall plate fit this box.