Structured
home networking cable panels for home construction enclosure Panel Modules for
Structured Home Networking or office - panel modules for connecting
Cat5e data and Video and Voice telephone Network for SCPPepX.
Structured home networking cable products panels and modules are versatile and simple to use.
Structured home network cable panel modules for structured home networking can be placed in
the panel on the panel mounting plates. Various number of module will fit inside
the panel base in the size of the panel selected. Structured modules allow
for the distribution throughout the home or office by running all incoming lines
to the panel and connection of the different rooms or work station areas from
the modules. 110 or RJ45 interfaces are available.
Structured Media Panels Play Video
Panel Insert
Modules Telephone Distribution Module
Easy structured home networking cable panel
media distribution of phone
services in the home.
To setup a telephone distribution system
, connect the incoming service line to the module. Users can just connect
RJ-45 jack or an IDC connector to activate telephone service at each
location.
PX-800IDC
Supports up to 4 Incoming Lines
8 of the 110 IDC Terminations points
make it easy to terminate all you
room phone lines to this direct point. This module has 110 punch down
on it so you can use a punch tool to terminate..
PX-800RJ45
Supports up to 4 Incoming lines. Some telecom modules even support
security utilities. The RJ-45/RJ-31X security interface enables line seizure
and auto dial-out capability for most security systems.
Cat5e Data
Patch Panel Module
PX-PP8 8 Ports
Cat
5e Data Patch Panel Module
supports up to 8 Computer lines branching out with RJ45
connector plugs at the bottom and 110 Punch downs in the rear.
Splitter NTCP
PXV-SM800
Video Splitter Module
Used to route the CATV or antenna signal to multiple locations.
Frequency range 5-2300 MHz forward and reverse.
Dimensions: 6.3"W x 4" H
Video Amplifier Module
PXV-A-1
Video Amplifier Module
Bi-directional module is used for two-way communication network with return
path to support pay-per-view or interactive CATV system.
Video Distribution Module
PXV-DM800
Video Distribution Module
This 3 x 8 is designed for whole house video distribution. It accommodates
CATV plus two AUX inputs for combining modulated signals such as cameras or
any video signal, and distributes all channels to eight locations. The
Bi-directional traffic with a 5-42MHz return path is perfect for interactive
or pay per view CATV systems.
CATV plus any video signals such as DVD, VCR
or Cameras coming from up to eight locations will be combined and distribute
to eight rooms. Users could watch DVD, VCR, TV programs or monitor baby
rooms or yards through different channel. Family members at each location
can view all channels without conflicts.
