Leviton 12 port patch panel field configurable

● Audio Video Leviton
● Audio Video PepX
● Banana Plug Leviton
● Banana Plug PepX
● Cable Ties
● Camera Outdoor Leviton
● Catv Voice Jack PepX
● Jacks connectors Leviton
   Decora Jacks
   Cat5 - Cat6
   Shielded
● Jacks connectors PepX
● F Connector Leviton
● F Connector PepX
● Fiber Optic Connector
● Fiber Optic Panels
● HDMI- Home Theater
● Media Panels Leviton
● Media Panels PepX
● 25 Pair Telco Panel
● Panel 12 Port Pop In
● Patch Panels Leviton
● Patch Panels PepX
   12 port to 96 port
   Cat 6 panels
  Patch cords
   10G Patch Cords
   Shielded cords
● Mini Patch Panels
   25 Pair
● Patch Cable Leviton
● Patch Cable PepX
● Phone-Voice
● 66 Block Leviton
● 66 Block PepX
● 110 Punch Blocks
● Phone plug adapters
   Test Set
● RJ Male Plugs PepX
● Rack Management
   Versi Duct
● Raceway for Cable
● Routers
● Shielded Hardware
● Surround Sound PepX
   Wall Plate Speaker
● Security Access PepX
● Surface Box Leviton
● Surface Box PepX
   Voice Phone
   Wall Phone Jack
   Beanie Connector
● Tools Testers
● Token Ring PepX
● Video distribution Lev
● Video Splitter PepX
● Video Intercom
● Wall Plates Leviton
● Wall Plates PepX
● Wall Plate Jack Combo
● Wall Mount Brackets
● Wireless Access
● Z Blocker PepX

Leviton 12 port patch panel field configurable means the 12 port patch panel comes empty. You pop in the connector that you want. Universal and versatile. Leviton 12 port patch panel field configurable are good for small sites in home or office where space is limited and the network is small or later expandable. Leviton 12 port patch panel field configurable panels are good for starting small.



	49255-Q89 POP-IN A PORT field configurable patch panel. Up to 12-ports can be popped in to this panel. Comes with back mounting bracket to mount on wall. Also sold separately 89D Mounting Bracket. This bracket just snaps away from the face plate of the panel. First screw the bracket down. The face plate can be removed anytime from the bracket to either fasten the bracket the back board or wall or to work in the cables that are accessible from the rear. If you need to pop in a BNC or an F-Connector or Fiber of Category 3 to Category 6 just pop them in and your ready to go. This can be an economicall way to add as you go or to put more then one style termination on the same patch panel. Allows simple changing of connector styles.

	49255-Q89 - No mounting bracket - face plate only
	40089-00D - Mounting Bracket Only 89D
	47689-0QP - Extra deep with Mounting Bracket (10" H x 2.375" W)

Home | Fax Orders