

SNTC6-324-6
24 Port Cat 6 Panel

SNTC6-348-6 48 Port Cat 6 Panel


SNTC6-12P-6 12 Port Cat 6 Panel

- Exceeds current TIA/EIA Cat 6
specifications supporting 1000 base-T & Gigabit Ethernet system
applications.
- Complys with TIA/EIA-568-B.2-1.
- 19" panel with color framed design
distinguishes each different assignment.
- Wire pins are plated with 50 micro inches
of gold over nickel.
- 110 IDC punch down accepts both 23-24 AWG
wires.
- Lifetime warranty.
- UL Approved.
|
Pep-X Cat6e
patch panels come in
12 Port - 24 port or 48 port Cat 6 pre-wired
configuration.
Tested to EIA/TIA Category 6 specifications. These panels allow IT people and
communications installers to be competitive.
You can use them in Category 6 and
lower applications. Home network or office network can be affordable. From
SCPPep-X this panel is budgeted to blast off
into the higher bandwidth Cat 6 networking arena.
There are many disguising
features in this panel one of which is that is takes either 23 AWG
or 24 AWG cable. Punching them down in the rear on 110 IDC styled
punch blocks. You can use most 110 punch down tools to terminate.
Pre-wired and factory tested.
Because you are dealing with the
Pepermint ®
advantage.
It is not all the time that you can happen on a distributor that
not only gives quality items but also gives you the advantage of
using your own power to move along. That is purchasing power. The
more you buy the more your power works. Discount Plus gives you
the edge. Simple enough but powerful. Now that works... |
|