Patch Panels - Cat5e Cat6 patch panels

Patch panels, Cat5e Cat6 patch panels and punch blocks prewired 12 port to 96 port and mounting brackets with cable management brackets, patch panel kits from Sellntell.com.

24 port patch panels, 48 to 96 port, Cat6, mounting brackets and punch down blocks email us it you don't see it. Patch panels are used in well designed and implemented cable systems for data ad phone hooks up. Patch panel configurations can be in may sizes. For example 12 port to 96 port on one patch panel. This will sit between the horizontal cable runs that come from your various computer locations or phone locations and to a central place, like an equipment closet. - It is here that you would cross connect the Cat 5 or Cat 6 or whichever type you are using, to the 110 IDC style punch downs on the back of the panel. In the front there are  RJ45 style female connectors.

You would then plug a patch cord into the RJ45 and run it to the hub or switch ports that you will be connecting to. You should use stranded cable for the patch cords for they are flexible to take movement. You should also be certain to fasten or secure the patch cords with proper cable management hardware to keep the from moving. By using a pre-wired panel you then already have the rear of the panel punched down with 110 IDC and the front is and RJ45 female connector. Punching down on the rear of these panels is easy.  There are many options with our patch panels including the unique low pricing structure. Structure cable projects are made simpler.