Security Camera Sequencer


 
Audio Video Leviton
Audio Video
PepX
Banana Plug Leviton
Banana Plug PepX
Cable Ties
Camera Outdoor Leviton
Catv Voice Jack PepX
Jacks connectors Leviton
   Decora Jacks
   Cat5 - Cat6
   Shielded

Jacks connectors PepX
F Connector Leviton
F Connector PepX
Fiber Optic Connector
Fiber Optic Panels
HDMI- Home Theater
Media Panels Leviton
Media Panels PepX
25 Pair Telco Panel
Panel 12 Port Pop In
Patch Panels Leviton
Patch Panels PepX
   12 port to 96 port
   Cat 6 panels
    Patch cords
   10G Patch Cords
   Shielded cords
Mini Patch Panels
   25 Pair
Patch Cable Leviton
Patch Cable PepX
Phone-Voice
66 Block Leviton
66 Block PepX

110 Punch Blocks
Phone plug adapters
   Test Set
RJ Male Plugs PepX
Rack Management
   Versi Duct
Raceway for Cable
Routers
Shielded Hardware
Surround Sound PepX
   Wall Plate Speaker
Security Access PepX
Surface Box Leviton
Surface Box PepX
   Voice Phone
   Wall Phone Jack
   Beanie Connector

Tools Testers
Token Ring PepX
Video distribution Lev
Video Splitter PepX
Video Intercom
Wall Plates Leviton
Wall Plates PepX
Wall Plate Jack Combo
Wall Mount Brackets
Wireless Access
Z Blocker PepX

Leviton Quickport

Security Camera Sequencer

Security system control from Leviton, the Security camera sequencer is a must have.

48213-VMA, 48213-CVS, 47690-NFA.

Leviton 48213-VMA & 48213-CVS &  47690-NFA


 48213-VMA

Security Camera Modulator
The Structured Media Center Modulator take the signal from a video device such as a security camera ( or multiple cameras using the Video Sequencer) and modulates the signal to one unused cable TV channel, which can then be combined with the CATV signal to multiple locations anywhere in the hom, effectively providing a whole-house security channel.

Select the broadcast channel to be programmed via signal button programming. The modulator provides 0, 10, 20 or 30 dBmv RF output.



 


 


SPECIFICATIONS 
  • Dimensions:  3.2"H x 2.25" W. x 1"d.
  • Inputs: 1 RCA video, 2 RCA left/right audio.
  • Outputs: 1 F-connector for RF Signal.
  • Operational channels: 14-69 UHF, 70-94, 100-125 CATV
  • Bandwidth: 50MHZ-660MHZ
  • Power: 12V AC 400 mA

    

48213-CVS Video Security Camera Sequencer

Sellntell Leviton Media Center Video Sequencer 48213-CVS

  • Dimensions: 7.3"H x 4.75"W x 2"D.
  • Power: 12 VDC@ 300 mA.
  • Inputs: Four RCA video; Eight RCA left/right audio.
  • Outputs: 2 RCA video and 4 RCA left/right audio.
  • Time Interval: 1.30 seconds, variable/adjustable.
  • Input to Noise Ratio: <1.2db.
  • Bandwidth: 5 MHz.
48213-CVS
VIDEO Video Sequencer
   
The Structured Media Video Sequencer, which automatically switches between video cameras, is a security product engineered for long-term home use, With the Video Sequencer, up to four Decora Cameras or Outdoor Cameras, in any combination, maybe monitored sequentially. The Sequencer allows a variable time-interval setting from 1 - 30 seconds on each camera to allow thorough surveillance of any perimeter or interior. 
The Video Sequencer has four composite RCA audio/video inputs and two sets of RCA outputs to connect with monitor or modulator. It snaps into a 280 or 420
Structured Media Center.

 click for price or buy...


47690-NFA RF Notch Filter

click for price or buy...

47690-NFA
RF Notch Filter

The RF Notch filter blocks incoming cable TV channels 75-80, allowing the Media Center Modulator or Component Modulator to Broadcast an in-house "security" or "entertainment" channel over the coaxial cable system without interference. Simply couple to the coaxial cable TV input on either a splitter or an active video distribution device such as the Leviton 3 x 8 Bi-Direction Video Module. Makes room in your channel array for any home security or entertainment video application. It also blocks outgoing signals, such as cameras, from being broadcast outside the home.

 
click for price or buy...

        
                 Special Control Cable



See sample layout diagram click here...

Home | Fax Orders





© Copyright 1998-2009, All rights reserved.