Dual Co Location rack server 2 compartments

 

server rack enclosure cabinet

computer networking hardware cat5 to cat6
 

 4 Post Rack Basic
    Four Point mounting

 ● 4 Post Rack Frames
    Buildable Frames

 ● 25U Server Rack
 ● 42U Server Rack
 ● 45U Server Rack

  Accessories
     Casters
     Raceways
     Rail kits
     Veritical Manager

  ● Hardware
  ● Electrical Outlets
  ● Lights and Fan
  ● Lock types
     Keyless
     Combo

 ● Nema 12 Enclosure

 ● Shelves
    Shelf 19"
    ● Shelves 23" rails
    ● Keyboard Shelf
    ● Frame Mount Shelve

 ● Swing Out Racks
   ● 12 inch Swing rack
   ● Big 48 inch Swing rack
   ● 48 high Swing rack
   ● 48 high Wall rack

 ● Ultra 24W x 36D

 ● Ultra Dual compartment
 ● Ultra Deep 24W x 42D
  Distribution Rack

 ● Wall Mounted
   Computer Cabinets

   ● Big Wall Cabinets
   ● Thin server Cabinets
   ● Wall Mt Accessories
   ● Wall Mount Brackets



 

DUAL CO-LOCATION SERVER RACK ENCLOSURE
2 Separate Compartment Enclosures
24 Wide x 36 Deep x 84 High



This is two cabinets in one. The Dual CO Location or CO-LO server rack enclosure cabinet has not one but two compartments. The compartments are separate from each other allowing for a door on each one of them with each having their own lock. This is truly a state of the are design for not only equipment rooms but for all types of important storage.

There are 3 different models to choose from all with different type doors and sides etc. You can also have sliding pull out shelves or mounted shelves. A big foot print of 36" Deep x 24" wide.

   

Overall Size 24"W x 36" Deep x 84"

 
  • 84" high. This is the height of the overall cabinet size. It is a dual compartment cabinet.
  • 22u Spacing per compartment.
  • Secure cable raceway.
  • Number top and bottom cable entry points.
  • Designed to house computer equipment in accordance with EIA Standard 310 within the width of traditional raised floor access tile.
  • Indoor use for computer room, server farm collocation, Headend, POP, Internet Data center.
  • 16 gauge welded construction, casters and levelers, bolt down provision, cable access top, bottom & rear w/ grommet, powder coated textured finish.
  • Grounding Kit
  • Field changeable from full size to 2 compartment interchangeable front to rear 14.25" x 4" cable access.
 
MOUNTING RAILS
The mounting rails are 19" mounting square hole 6mm rails. The cabinet comes with a bag of 50 square hole clip nuts & hareware rail inserts.
 
SQUARE HOLE MOUNTING RAILS - 3 Pair
FRONT or DOORS
Doors for Style 1 below are perforated with latch and lock. There is one for the top compartment and one for the bottom compartment.
 
STYLE 1:
Picture is of cabinet with Glass front doors.

  • PXUS84 -  Cabinet Frame or size - 84" High
  • COLOR - Black
  • 19" Square Hole Mounting Rails
  • TOP of CABINET  - Perforated Top
  • FRONT DOORS - Perforated front doors (not shown) with separately keyed locks.
  • REAR of CABINET - Perforated Rear
  • SIDES of CABINET - 2 Perforated sides (not shown)
  • No Accessories
  • Two Compartments
STYLE 1  TO GET PRICING OR TO PURCHASE OF STYLE 1
Item Number
 

See pdf file

  
STYLE 2  

Similar to above but with the following changes
  • Tempered Glass Front Doors as shown in picture above, with separately keyed locks.
  • Solid Sides as shown in picture above.
  • 10" Fan top and vented rear
Item Number

See pdf file

 
 

Home | Fax Orders





© Copyright 1998-2009, All rights reserved.