|
| RS232136-1 | | RS232 Mini Tester with connection on both sides led lights labeled- PepX PXID-28 | |
 |
RS232 Cable Mini Tester
See what is what by looking at the lights and the label. Tells you what is connected wire is active. Just plug in between your cable and it will read out if cable is hot. |
|
|
| | 49800-FCC | | Fiber Optic Consumbles Kit use with termination of fiber cable Leviton PXID-34 | |
 |
Fiber Optic Fast Cure Consumables Kit
Fase-Cure Consumable kit for working with fiber optic termainations.
- 50 Wipes
- 50 Alcohol pads (not for human consumption or injestion)
- 30 Each 12µm, 3µm, and 0.3µm lapping film
- 25 Needles for fiber optics
- 25 syringes and music wire for fiber optics
|
|
|
| | 49800-FAN | | Fiber Optic Fan Out Consumables Kit for fiber teminating ends - Leviton PXID-35 | |
 |
Fiber Optic Fan Out Consumables Kit
Consumable kit for working with fiber optic terminations. |
|
|
| | 49800-SMK | | Tool Kit Fast Cam Fiber Optic Took Kit with Cleaver - Leviton PXID-36 | |
 |
FastCam Tool Kit Fiber Optic
Fiber Optic tool kit for Leviton FastCam Leviton Connectors for single and mult mode fiber. |
|
|
| | 49553-814 | | Punch down impact tool 49553-814 for 110 and other termination Leviton PXID-50 | |
 |
Leviton Punch Impact Tool
For punching down and terminating cable. Blade not included. |
|
|
| | SNT-819A | | Tool Impact Mult pair 4 pairs at a time 110 block fast termination of multiple cables PepX PXID-51 | |
 |
Tool Multi Pair Punch Down Punch 4 pairs at a time. 24 Awg. Suitable for both cable side and connect side termination blocks. Blades are chanagable and reversible. |
|
|
| | 49553-TTH | | Mult pair Impact Tool 4 Pair for Cat6 termination - Leviton PXID-52 | |
|
Tool Multi Pair Punch Down Punch 4 Pair Cat6 cable at one time. Suitable for both cable side and connect side termination blocks. Blades are chanagable and reversible. |
|
|
| | 49553-110 | | Replacement Blade 110 punch down for Impact Tool - Leviton PXID-53 | |
 |
Replacement blade 110 punch down
For Leviton 110 Impact Tool. Tool Sold Separately. |
|
|
| | 49553-64H | | Mult pair Impact Tool Blade Head Cat6 110 IDC Termination - Leviton PXID-55 | |
 |
Tool Multi Pair Blade Head for Cat4 4 Pair
Punch 4 Pair Cat6 cable at one time onto 110 IDC. Suitable for both cable side and connect side termination blocks. Tool Blades are chanagable and reversible. |
|
|
| | 49553-55H | | Mult Pair Impact Tool Blade Head Cat5e 5 pair 110 IDC Punch - Leviton PXID-56 | |
|
Tool Multi Pair Blade Head for Cat5e 5 Pair
Punch 5 Pair Cat5e cable at one time onto 110 IDC. Suitable for both cable side and connect side termination blocks. Tool Blades are chanagable and reversible. |
|
|
| | 49553-KRN | | Replacement Blade KRONE punch down for Impact Tool 25 Pack- Leviton PXID-58 | |
 |
Punch down tool Replacement blade for KRONE
For Leviton Impact Tool. |
|
|
| | 49553-BIX | | Replacement Blade BIX punch down for Impact Tool - Leviton PXID-60 | |
 |
Punch down tool Replacement blade for BIX
For Leviton Impact Tool. |
|
|
| | EZ-PXONESHOT-A | | Cat 5e Cat6 One Shot 4pair termination Tool for PepX Keystone Jacks - PepX PXID-64 | |
 |
Jack EZ-PXONESHOT Termination tool
Terminate PepX Cat5e and Cat6 and Leviton jacks all on one shot. Place the cable into the jack on to the tool and terminate all 4 pairs in at once. Use on Keystone PepX Jacks and Leviton 90 Degree jacks. |
|
|
| | TOOL-EZ-RJ45-PRO | Shielded | | Tool for EZRJ-45 Pro Male Plugs for Cat5 - Cat6|+ Shielded - PepX PXID-374 | |
 |
TOOL EZRJ-45 PRO This tool is used for crimping EZ-RJ45 connectors for Cat5e, Cat6 and EZ-45 Shielded connectors. Compatible with all RJ45, RJ12, Rj11 modular plug connecdtors. Also has built in wire cutter and stripper. |
|
|
| | 49251-W63 | | Hinged Wall Mt Bracket 5.25 H x 6 D x 19 W Mounting - LEVITON PXID-386 | |
 |
LEVITON WALL MOUNTED HINGED BRACKET
3 position or 3RU - 5.25" H x 6" Deep x 19" wide mounting. Mount on wall for space savings. |
|
|
| | SNT-812 | | Coax cable cutter and stripper clip RG 59 and RG6 easily - Pep-X PXID-407 | |
 |
Coaxial Cable Cutter and Stripper tool.
Strip and cut coaxial cable to the size needed. |
|
|
| | SNT-579-TL | | Tool Punch Down 110 budget tool priced right small jobs - PepX PXID-579 | |
 |
Punch Down Tool - Cable Stripper Cat3-Cat6
This simple budget punch down tool and cable stripper is ideal for installers where only a few punch downs are going to be made and the more expensive pro tools are not needed.
Plastic - use it until you wear it out or use it once and throw it away. Doing a small job can be made less expensive if your not a professional network installer, and even if you are these are simple and budget priced. Don't worry if you loose it you can always purchase another one. What makes it nice is it's punching and stripping capabilities. |
|
|
| | SNT-803 | | Cable Termination Tester RJ11 RJ12 RJ45 BNC the ideal cheap tester- Pep-X PXID-700 | |
 |
Cable Termination Tester
Cat3 to Cat5, cat5e USOC Voice. Test terminations. Tests for opens, shorts, wiring RJ11 RJ45 RJ12 BNC. |
|
|
| | SNT1690-001 | | Punch Down impact Tool with blade for 110 and other terminations - Pep-X PXID-701 | |
 |
Punch down tool with blade.
Impact termination tool. Reversable blade. If you are an installer or putting in cable and need to punch it down than you can't do without this tool. Fits most other brand blades too. This one comes with a blade. Most other tools the blade is extra. That's what makes this a super deal. |
|
|
| | SNT-802 | | Crimp tool for Cat5e and Phone moduler plug termination - Pep-X PXID-702 | |
 |
Module Crimp tool
For those RJ Male plugs that you have been trying to stick on the end of your phone or Category 5 or 5e cables. Of course you must have the male plugs. This is the tool to crimp those plugs onto the cable. Crimps 4 or 6 or 8 and 8c Module plugs. Cuts - strips and crimps. For RJ male plug. An installers essential. |
|
|
| | SNT-810 | | Dry wall hammer and cutter for sheet rock wall cable installations - SNTPep-X PXID-704 | |
 |
Dry wall hammer
for sheet rock wall cable installation. |
|
|
| | SNT-705-817A | | TOOL for F - BNC - RCA Compression connectors - SNTPep-X PXID-705 | |
 |
Compression Connector Tool
For F, BNC and RCA compression type connectors. Tool comes with adapters that fits into the compression chamber which make a tight compressed seal for all three types of connectors. Adapters are convieniently stored in the handle. |
|
|
|
Total Records: 43 22 |
need the right tools to get the job done. From Punch down
tools to cutters and testing, we have the discount computer hardware supply
or all your telecom needs. 
